Lenovo ThinkSystem M.2 5400 PRO 240GB Read Intensive SATA 6Gb NHS SSD

Part number 4XB7A82286

Price: $2,417.80 USD

ThinkSystem M.2 5400 PRO 240GB Read Intensive SATA 6GB NHS SSD

Specifications

Works with these servers

• Lenovo ThinkSystem ST550
• Lenovo ThinkSystem SR630 V2
• Lenovo ThinkSystem ST650
• Lenovo ThinkSystem SR645
• Lenovo ThinkSystem SR655
• Lenovo ThinkSystem SR860 V2
• Lenovo ThinkSystem SR670 V2
• Lenovo ThinkSystem SR650 V2
• Lenovo ThinkSystem SR860
• Lenovo ThinkSystem SR630
• Lenovo ThinkSystem SR590
• Lenovo ThinkSystem ST250 V2
• Lenovo ThinkSystem SN550
• Lenovo ThinkSystem SN550 V2
• Lenovo ThinkSystem SR950
• Lenovo ThinkSystem ST650 V2
• Lenovo ThinkSystem SR670
• Lenovo ThinkSystem SR635
• Lenovo ThinkSystem SD530
• Lenovo ThinkSystem SR850
• Lenovo ThinkSystem SR650

Configure a complete server with live pricing

Frequently asked questions

How can I enable TPM on a Lenovo SR650 running ESXi 7.0 without disrupting my current setup?

To enable TPM on your Lenovo SR650, refer to the technical documentation available at Lenovo's website, which provides guidance on configuring TPM with VMware environments. Ensure to follow the steps carefully to minimize any potential impact on your existing system. [community thread]

How can I configure RAID 1 with NVMe drives on the SR650 V2 server?

Ensure you have the appropriate NVMe RAID FoD license, as only Intel-branded NVMe SSDs are supported for RAID configurations. Additionally, verify that you are using Lenovo-qualified NVMe drives for compatibility and consider updating your firmware with the latest Lenovo Bootable Media Creator ISO. [community thread]

What should I do if my Lenovo ThinkSystem V2 server reports a low CMOS battery during operation?

If your server indicates a low CMOS battery, it is necessary to replace the battery. Additionally, updating the firmware may help enhance battery performance. [community thread]

What can I do if my ThinkSystem SR630 V2 has slow disk speeds?

If you're experiencing low write speeds of 15-20 MBps, this may be expected due to the cacheless nature of the 5350 controller, which operates in write-through mode. To potentially improve performance, you can enable the drive cache using the MegaRAID BIOS interface or storcli commands. For significant speed enhancements, consider upgrading to a controller with a cache module. [community thread]

How can I enable Intel VT-d for virtualization on the SR650 V2 server?

To activate Intel VT-d, reboot the server and press F1 to access the UEFI Setup. Navigate to System Settings, then Operating Modes, set it to Custom Mode, and save the changes. Next, go to Devices and I/O Ports, enable Intel VT for Directed I/O (VT-d) and SR-IOV, then save and reset the system. [community thread]