Dell PERC H730P

Part number 7XTY8 · also known as 02RFJJ · 71PGJ · 7XTY8

Price: $350.00 USD

Controller Dell PERC H730P Miiniature /w 2GB For Blade Server Dell XE7420/R740xd2/PE C6420

Specifications

Works with these servers

• Dell PowerEdge R340
• Dell PowerEdge T340
• Dell PowerEdge R240
• Dell PowerEdge C6420
• Dell PowerEdge R540
• Dell PowerEdge R740xd
• Dell PowerEdge R640
• Dell PowerEdge R940xa
• Dell PowerEdge T140
• Dell PowerEdge T640
• Dell PowerEdge R840
• Dell PowerEdge R440
• Dell PowerEdge MX740c
• Dell PowerEdge C4140
• Dell PowerEdge R7425
• Dell PowerEdge MX840c
• Dell PowerEdge R740
• Dell PowerEdge FC640
• Dell PowerEdge T440

Configure a complete server with live pricing

Frequently asked questions

What should I do if my PowerEdge R740xd is stuck at boot after switching from RAID to HBA mode?

To resolve the boot issue, revert the PERC controller back to RAID mode via iDRAC and perform a cold power cycle for 30 to 60 seconds. After rebooting, access the System Setup to delete any old UEFI boot entries, clear all configurations in the PERC settings, and ensure that your BIOS, iDRAC, and PERC firmware are updated before switching back to HBA mode. [community thread]

What cables and components are needed to retrofit an R440 server for NVMe support?

For retrofitting the R440 to support NVMe drives, it's advisable to refer to the user manual for accurate cabling instructions. A PCIe extender card may be necessary if utilizing the SAS drive slots, and ensure that the SAS cables are of adequate length to connect to the HBA card. [community thread]

What does the PCI1318 error mean on a T440 server and how can it be resolved?

The PCI1318 error on a T440 server may indicate an issue with the Broadcom network interface cards when using kernel versions greater than 6.5. Disabling these network cards in the system BIOS can allow the server to boot without errors. Alternatively, replacing the network card with a compatible one can also resolve the issue. [community thread]

Why can't I see my PCIe storage card drives as boot options in the R740xd?

Ensure that the PCIe storage card is compatible with the R740xd, as only specific models are validated for this server. Additionally, check the BIOS settings to confirm that the boot mode is correctly configured. [community thread]

What should I do if the Riser 1A length interferes with the PERC H330 mini in my R740XD server?

Consider using a different riser slot, such as Riser 2 or 3, for your GPU installation. Additionally, ensure you have the necessary GPU enablement kit components to facilitate proper installation. [community thread]