Dell 2400W Platinum PSU

Part number D3V0D

Price: $148.40 USD

DELL POWER SUPPLY 2400W INPUT 100-240V 50-60HZ 16.0A 80 PLUS PLATINUM 94% EFFICIENCY EXTENDED POWER PERFORMANCE EPP HOT PLUG FOR DELL EMC POWEREDGE C6400 CHASSIS ( C6420 SLED ) / C4140 / FX2S / R740 / R740XD / R940 - OUTPUT +12.2V - 196.72A +12VSB - 3.5A

Specifications

Works with these servers

• Dell PowerEdge R750xa
• Dell PowerEdge MX750c
• Dell PowerEdge R940xa
• Dell PowerEdge T640
• Dell PowerEdge R840
• Dell PowerEdge R7525
• Dell PowerEdge MX740c
• Dell PowerEdge R750
• Dell PowerEdge R7425
• Dell PowerEdge MX840c
• Dell PowerEdge R940
• Dell PowerEdge FC640

Configure a complete server with live pricing

Frequently asked questions

What GPUs are compatible with the PowerEdge R7525 and what is the maximum power draw?

For compatible GPUs and recommended slots, consult the technical guide, specifically page 27. The maximum power draw for GPUs is detailed in the table on page 7. [community thread]

What could cause my T640 server to restart and burn out an H100 GPU?

The T640 server is not compatible with H100 GPUs due to its insufficient power capacity and PCIe generation limitations. The server can only support GPUs with a maximum power consumption of 300W, while the H100 requires at least 350W and is designed for Gen 5 PCIe, which the T640 does not support. [community thread]

How can I set PXE as the primary boot device on a PowerEdge R7525 running in UEFI mode?

To set PXE as the first boot option, access the System BIOS Settings, navigate to Boot Settings, and then UEFI Boot Settings. You may need to disable other boot options to ensure that PXE remains the primary boot device, as changes to the UEFI boot sequence may not persist otherwise. [community thread]

What should I do if my Dell PowerEdge R940 won't start and shows voltage errors?

First, ensure the chassis is securely closed, as an open chassis can prevent startup. Next, check that all power supplies are functioning and properly connected, and consider reseating CPU 4 and its RAM. If issues persist, inspect the motherboard for damage and test power supply voltages. [community thread]

What should I do if my Dell PowerEdge R940 shows a BP0 PG voltage error and won't start?

To address the BP0 PG voltage error, you need to update the CPLD to version 1.0.5 via iDRAC. However, if the server does not power on, you may need to troubleshoot further or seek professional assistance. [community thread]