Part number KWC41
Request a quote
Power Cable R760/R7615 4x2.5" MB_SIG_PWR_0 for R_BP_PWR_1
| component type | cable |
|---|
Configure a complete server with live pricing
This error is typically associated with issues in the motherboard's voltage regulation or CPU seating. To troubleshoot, perform a power drain, check for firmware updates, and inspect the CPU for any bent pins or debris. If the problem continues, the motherboard may need to be examined. [community thread]
Yes, the R760 server with dual CPUs can accommodate two Nvidia L40 GPUs, as they are double-width and within the power specifications. Ensure you have a power supply of at least 1600W and the appropriate GPU riser kit, power cables, and cooling components for optimal performance. [community thread]
To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]
To connect the Nvidia A100-SXM4-40GB GPU in a R760 server, you will need the appropriate power cable. The correct part numbers to look for are 9PVH2 for Riser 4 and CPH58 for Riser 1, but it's advisable to verify compatibility before purchasing. [community thread]
The R760XA server requires a minimum of two H100NVL GPUs for proper operation, as it is designed for optimized GPU support. Installing a single GPU may lead to boot errors and complications during hardware upgrades. It is advisable to consult with a sales engineer to ensure the configuration meets your needs. [community thread]