Part number RHDFM
Price: $26.60 USD
OEM Dell EMC PE R440 R450 R640 R650 R660 R6415 R6425 R6515 R6525 R6615 R6625 LCD 1U Front Bezel
| accessory kind | bezel |
|---|
Configure a complete server with live pricing
A detailed list of supported processors for the R640 can be found in the technical guide provided by Dell. If you have questions about specific processors not listed, consider reaching out to customer support for assistance. [community thread]
This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]
To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]
The issue may arise from differences in memory rank, firmware, or PCB revisions between the original and new DIMMs, even if the part numbers match. To troubleshoot, try booting with one module from each set in different CPU slots, and consider updating the BIOS and iDRAC firmware. If problems persist, you may need to return the new modules for ones that match the original revision. [community thread]
The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]