Part number TYYJN
Request a quote
1 u manage line frame 02 j1cf R240 bedding line frame/R340 / R250 / R350 R440 / R640 / R450 / R650
| component type | mechanical |
|---|
Configure a complete server with live pricing
The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]
To disable the liquid cooling setting, you can use an undocumented OEM IPMI command with ipmitool. Ensure you have root/admin privileges, and after executing the command, reboot both the iDRAC and the host operating system to apply the changes. [community thread]
When replacing the backplane and controller in a Dell R650 server, it's important to note that the necessary cables may not be included with the new components. It is recommended to contact local support or raise a ticket to ensure you receive the correct cables for your setup. [community thread]
If your R360 server remains excessively loud despite configuring the fan settings to 'Minimum Power' and 'Off', it may indicate a deeper issue such as a faulty temperature sensor, a defective motherboard, or a firmware bug affecting thermal control. In such cases, professional support may be necessary to diagnose and resolve the problem. [community thread]
The R360 server does not officially support NVMe SSDs with the H755 controller, as the only validated NVMe option is the BOSS-N1, which is a specific configuration. The server primarily supports 2.5-inch and 3.5-inch SAS and SATA drives. [community thread]