Part number XC48N
Price: $133.00 USD
Dell PE R750xa R760xa 8-pin to MB_SIG_PWR_0 Slot 33 GPU Power Cable
| component type | cable |
|---|
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
The appropriate part number for the 8-pin GPU cable for the A100 GPU in an R760xa server is 191JG, which is the GPU PUCK cable. You can refer to the cabling guide for additional details. [community thread]
The R760XA server requires a minimum of two H100NVL GPUs for proper operation, as it is designed for optimized GPU support. Installing a single GPU may lead to boot errors and complications during hardware upgrades. It is advisable to consult with a sales engineer to ensure the configuration meets your needs. [community thread]
To convert an R750 into a vSAN ESA ReadyNode, it is recommended to use an HBA355. However, be aware that changes to the storage configuration after purchase are not supported, and there are no kits available for modifications. [community thread]
To install 4 GPUs in a PER760XA server, you will require a GPU enablement kit (part number 470-BCTG) along with several specific cables: 0T07W (Left GPU cable), 191JG (CPU GPU PUCK cable - Black), 7V563 (Right GPU cable), M88NN (GPU PUCK cable - Gray, 12 Pin), XYDKX (GPU PUCK cable - Black, 12 Pin), and YHF7N (CPU GPU PUCK cable - Gray). Ensure you have all these cables for proper installation. [community thread]