Part number 865434-B21
Price: $1,260.00 USD
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit — 800W DC-input Flex Slot PSU for Gen10 ProLiant servers (DL360/DL380/DL385/DL560/DL580/ML350 Gen10).
| input | DC |
|---|---|
| watts | 800 |
| wattage | 800 |
| hot plug | True |
| redundant | True |
| efficiency | -48VDC |
| generation | Gen10 |
| form factor | Flex Slot |
| component type | hot_plug |
| compatibility family | hpe-800w |
Configure a complete server with live pricing
Try reseating the PCI-E riser card to ensure a proper connection. If the issue persists, test with a different, known working riser card to determine if the problem lies with the riser or the server's motherboard. [community thread]
If you experience increased fan noise following an ILO5 firmware update to version 3.04, downgrading to version 3.03 may resolve the issue. You can download the previous version and update the firmware through the ILO5 dashboard to restore normal fan operation. [community thread]
An amber light on your HP ProLiant DL360 Gen10 server typically signals a hardware issue. For further assistance, consult the Service and Maintenance Guide from the HPE Support Center or check related forum discussions regarding similar problems. [community thread]
To resolve the REST API error, try resetting the iLO from the console and then SSH into the iLO to execute the command 'oemhp_clearRESTAPIstate'. After that, reboot both the server and the iLO by shutting down the server, disconnecting all power sources and cables, reconnecting them, and powering the server back on. [community thread]
If your ML350 Gen10 server fails to POST and indicates an internal processor error, first ensure that the CPUs are properly seated and compatible. You may also need to clear the NVRAM/CMOS by following the appropriate steps in the server manual. If the issue persists, consider checking for additional error codes, updating or rolling back the firmware, and inspecting other hardware components. [community thread]