Dell 960GB SAS SSD

Part number H8X3X

Price: $348.60 USD

Dell 960GB SAS 2.512G RI SSD G14-G16 KPM5XRUG960G R340 R750 R750XA R760XS

Specifications

enduranceRI
interfaceSAS
drive typessd
capacity gb960
form factor2.5"
endurance classRI

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What do the LED codes on the R660 motherboard indicate when the server fails to boot?

The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]

Can I add U.2 NVMe drives to an R6615 server with an H755 SAS controller?

No, the H755 SAS controller is not compatible with NVMe drives, even if the backplane supports them. You will need to use a dedicated NVMe controller for this configuration. [community thread]

Is the Dell firmware version 8.11.2.0.18-26 compatible with the PERC H965i Front RAID controller?

If the firmware is listed as compatible, it should work with the PERC H965i Front RAID controller. However, be aware that installation on unsupported servers may be challenging. [community thread]

What caddy or tray is needed for a Samsung PM9A3 2.5" 3.84TB NVMe U.2 SSD in a Dell R760XS server?

To install the Samsung PM9A3 SSD in a Dell R760XS server, you will need the following parts: 1x DXD9H (caddy for 2.5" drive), 4x HFX4T (screws), and 1x P7G03 (SSD itself). It is advisable to confirm with sales for any integrated part options. [community thread]

Why can't I find the RAID 10 option for the PowerEdge R6615 during configuration?

The RAID 10 option may not be visible due to configuration settings or limitations in the sales tool. It is advisable to reach out to sales support for potential overrides or further assistance, as the H755 controller does support RAID 10. [community thread]