Part number TFKHK
Price: $628.60 USD
Dell PERC H745 Front 12GB/S SAS Sixteen Port 4GB NV Custom Adapter RAID Controller - ( Series 10 ) 6GB/S SATA 16-Port ( 2X8 ) Non Volatile Flash Backed Cache Supports PCI-E 3.0 Speeds ( 2
| ports | 16 |
|---|---|
| form factor | front |
| component type | controller |
| controller family | PERC H745 |
Configure a complete server with live pricing
To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]
To identify the failed drive, collect a Technical Support Report (TSR) that includes storage logs, which can provide insights into the drive's status. If the drive rebuild process is unsuccessful, you can replace the drive by following the hot-swapping procedure, ensuring to verify the correct drive using the server management interface. [community thread]
Yes, the Dell PowerEdge R650 can support this configuration using the S150 PERC software controller, which does not require a hardware RAID card. For software RAID, ensure that you are using compatible Dell NVMe drives and check the specifications for any additional requirements. [community thread]
The H755N requires NVMe-specific cables, which are different from those used for SAS PERC cards. Ensure that your server's configuration supports the necessary backplane for the H755N, as it typically accommodates specific drive setups. [community thread]
Begin by performing a full backup, as the drive configurations may change when switching controllers. The cabling is generally the same, but it's advisable to verify specific configurations. The part number for the H745 RAID controller is JT47Y. [community thread]