Dell 16GB DDR4-2933 RDIMM

Part number TFYHP

Price: $173.60 USD

DELL 16GB (1x16GB) 2rx8 2933MHz PC4-23400 Cl21 Ecc Registered Dual Rank 1.2v DDR4 Sdram 288-pin RDIMM Memory Module For Poweredge C4140, C6420, Fc640, M640, R640, R740, R740xd, R840, R940, T640

Specifications

speed mhz2933
capacity gb16
module typeRDIMM
ram generationDDR4

Works with these servers

Configure a complete server with live pricing

Frequently asked questions

What should I do if my PowerEdge R740 shows no video or keyboard response after adding memory?

First, try removing the CMOS battery for a few minutes to reset the BIOS to its default settings. Ensure that all necessary connections are secure and check the status LEDs on the mainboard to determine if the server is ready to boot. If the issue persists, further hardware diagnostics may be needed. [community thread]

Why does my Dell R640 show a memory incompatible error when using mixed DIMMs?

The issue may arise from differences in memory rank, firmware, or PCB revisions between the original and new DIMMs, even if the part numbers match. To troubleshoot, try booting with one module from each set in different CPU slots, and consider updating the BIOS and iDRAC firmware. If problems persist, you may need to return the new modules for ones that match the original revision. [community thread]

What should I do if I encounter a memory error when installing RAM in a Dell PowerEdge R750xs server?

If you receive a memory error, try rearranging the RAM modules to different slots, as one of the DIMMs may be faulty. Additionally, ensure that your BIOS and iDRAC are updated to the latest versions, as this can sometimes resolve compatibility issues. [community thread]

What should I do if I encounter a memory incompatible error after installing RAM in a Dell PowerEdge T440 server?

Verify that the RAM modules are installed according to the server's memory configuration guidelines. Ensure that the DIMMs are compatible and properly seated as per the specifications provided in the installation manual. [community thread]

How can I manage fan speeds on a Dell R740XD2 when they are stuck at high RPMs?

To address high fan speeds on the Dell R740XD2, ensure you are using a supported operating system, as Flatcar is not officially validated for this server model. Consider switching to a supported OS like Ubuntu or Red Hat, which may allow for better fan control. If you continue to use Flatcar, be aware that Dell does not provide support for issues related to it. [community thread]