Request a quote — built to order from tested, warrantied stock.
The HPE ProLiant DL380 Gen10 Plus is a refurbished 2U Rack server (Gen10 Plus) for the 3rd Generation Intel Xeon Scalable, DDR4 · up to 8192 GB · 32 DIMM slots · up to 3200 MT/s · 8 channels per CPU · ECC. Drive layouts: 8SFF (SAS/SATA); 24SFF (SAS/SATA); 8LFF; 12LFF. Every unit is tested, warrantied and shipped from Canada; configure it online with parts that are checked for compatibility.
Best for: storage, virtualization, database.
| Form factor | 2U Rack |
|---|---|
| Generation | Gen10 Plus |
| CPU | 2 socket(s) · 3rd Generation Intel Xeon Scalable · LGA4189 · up to 40 cores per CPU · max 270 W TDP |
| Memory | DDR4 · up to 8192 GB · 32 DIMM slots · up to 3200 MT/s · 8 channels per CPU · ECC |
| Drive bays | 8SFF (SAS/SATA); 24SFF (SAS/SATA); 8LFF; 12LFF |
| Storage controllers | HPE Smart Storage SR100i Gen10 Plus SW RAID, Intel Virtual RAID on CPU (Intel VROC), HPE Smart Array E208i-a SR Gen10 Controller, HPE Smart Array E208i-p SR Gen10 Controller, HPE Smart Array P408i-a SR Gen10 Controller, HPE Smart Array P408i-p SR Gen10 Controller |
| PCIe | Gen 4.0 · 8 slots · 6× x16 |
| Networking | OCP slot |
| GPU | up to 6 GPUs · 3 double-width |
| Power | 1800W Titanium, 2200W Titanium, 800W Platinum, 1000W Titanium, 1600W Platinum · redundant · hot-swap |
| Management | iLO 5 · iLO 5 Standard |
| Cooling | ASHRAE A4 · hot-swap fans |
Real parts from our catalog for this chassis, priced from live market listings and vendor offers:
Chassis pricing is quoted by our team; component prices come from live market listings and vendor offers and are refreshed nightly. Lines without market evidence are quoted by our team.
To install RAM in the HPE ProLiant DL380 Gen10 Plus, refer to the memory population guidelines specific to your server model. Ensure that the RAM type and processor are compatible, and consult the documentation for the correct slot configuration. [community thread]
This issue is known to occur with HPE ProLiant Gen10/Gen10 Plus servers, where iLO may incorrectly report a critical status due to stale sensor data or misinterpretation of cache states. To resolve this, perform a full power cycle of the server to clear sensor states, or use the iLO CLI to force a hardware health rescan. Additionally, ensure that both iLO and Smart Array controller firmware are updated to the latest versions. [community thread]
No, the server requires the first CPU socket to be populated for it to function correctly. Operating with only the second CPU installed is not a supported configuration and will prevent the server from booting. [community thread]
Check the BIOS settings for the Embedded Video Connection and ensure it is set to 'Always enable.' Additionally, verify that the System ROM (BIOS) and iLO firmware are updated to the latest versions, as firmware updates can resolve video output issues. [community thread]
Before proceeding with the firmware update, ensure that you have any necessary recovery passwords for the TPM features configured in your operating system. It is advisable to review the server's documentation for guidance on handling TPM warnings during firmware updates. [community thread]
To manage the RAID controller, you can use the UEFI System Utilities for initial configuration. For ongoing management, the HPE MegaRAID Storage Administrator (MRSA) tool may not be available, but you can utilize the StorCLI command-line interface to check the status and configure the RAID settings. [community thread]
iLO 5 does not provide information on the rebuild status of SSDs. To check or monitor the rebuild status, you will need to use HPE Smart Storage Administrator or HPE MegaRAID Storage Administrator. [community thread]
It is not possible to expand a RAID 10 array using a Megaraid 416i-p controller, as confirmed by HP. You may need to consider creating a new array with additional disks or migrating to a different RAID level. [community thread]