Dell Mounting for Controller Dell PowerEdge R7525 24x2.5" fPERC

Part number 1GXYG

Price: $112.00 USD

Mounting for Controller Dell PowerEdge R7525 24x2.5" fPERC

Specifications

Works with these servers

• Dell PowerEdge R7515
• Dell PowerEdge R340
• Dell PowerEdge T340
• Dell PowerEdge R240
• Dell PowerEdge C6420
• Dell PowerEdge MX750c
• Dell PowerEdge R350
• Dell PowerEdge R540
• Dell PowerEdge R6515
• Dell PowerEdge XR11
• Dell PowerEdge XR12
• Dell PowerEdge R550
• Dell PowerEdge R940xa
• Dell PowerEdge T140
• Dell PowerEdge T640
• Dell PowerEdge R840
• Dell PowerEdge C6525
• Dell PowerEdge R440
• Dell PowerEdge R7525
• Dell PowerEdge MX740c
• Dell PowerEdge R250
• Dell PowerEdge C4140
• Dell PowerEdge R7425
• Dell PowerEdge R450
• Dell PowerEdge R650
• Dell PowerEdge R6525
• Dell PowerEdge R650xs
• Dell PowerEdge MX840c
• Dell PowerEdge R940
• Dell PowerEdge FC640
• Dell PowerEdge T440

Configure a complete server with live pricing

Frequently asked questions

What should I do if my Dell R450 shows HWC8010 and UEFI0459 errors during startup?

To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]

What cables and components are needed to retrofit an R440 server for NVMe support?

For retrofitting the R440 to support NVMe drives, it's advisable to refer to the user manual for accurate cabling instructions. A PCIe extender card may be necessary if utilizing the SAS drive slots, and ensure that the SAS cables are of adequate length to connect to the HBA card. [community thread]

What does the PCI1318 error mean on a T440 server and how can it be resolved?

The PCI1318 error on a T440 server may indicate an issue with the Broadcom network interface cards when using kernel versions greater than 6.5. Disabling these network cards in the system BIOS can allow the server to boot without errors. Alternatively, replacing the network card with a compatible one can also resolve the issue. [community thread]

How can I identify and replace a failed drive in a PowerEdge R540 or R550 server?

To identify the failed drive, collect a Technical Support Report (TSR) that includes storage logs, which can provide insights into the drive's status. If the drive rebuild process is unsuccessful, you can replace the drive by following the hot-swapping procedure, ensuring to verify the correct drive using the server management interface. [community thread]

Can the Dell PowerEdge R650 be configured with 10 NVMe U.3/U.2 drives and 2 SATA drives without a RAID controller?

Yes, the Dell PowerEdge R650 can support this configuration using the S150 PERC software controller, which does not require a hardware RAID card. For software RAID, ensure that you are using compatible Dell NVMe drives and check the specifications for any additional requirements. [community thread]