Dell VxRail | Dell PE R540 R550 R740 R740xd R740xd2 R7425 R750

Part number HHGMN

Price: $17.49 USD

VxRail | Dell PE R540 R550 R740 R740xd R740xd2 R7425 R750 R750xa R750xs R7515 R7525 R760 R760xa R760xd2 R760xs R7615 R7625 R840 R860 2U Front Bezel

Specifications

Works with these servers

• Dell PowerEdge R7515
• Dell PowerEdge R7625
• Dell PowerEdge R750xa
• Dell PowerEdge R860
• Dell PowerEdge R7615
• Dell PowerEdge R750xs
• Dell PowerEdge R740xd
• Dell PowerEdge R550
• Dell PowerEdge R840
• Dell PowerEdge R7525
• Dell PowerEdge R760
• Dell PowerEdge R750
• Dell PowerEdge R760xd2
• Dell PowerEdge R740xd2
• Dell PowerEdge R760xa
• Dell PowerEdge R760xs
• Dell PowerEdge R740

Configure a complete server with live pricing

Frequently asked questions

What should I do if my PowerEdge R740 shows no video or keyboard response after adding memory?

First, try removing the CMOS battery for a few minutes to reset the BIOS to its default settings. Ensure that all necessary connections are secure and check the status LEDs on the mainboard to determine if the server is ready to boot. If the issue persists, further hardware diagnostics may be needed. [community thread]

What GPUs are compatible with the PowerEdge R7525 and what is the maximum power draw?

For compatible GPUs and recommended slots, consult the technical guide, specifically page 27. The maximum power draw for GPUs is detailed in the table on page 7. [community thread]

What does the error 'CPU 1 VCCIO PG Voltage Is Outside of Range' mean on a PowerEdge R760?

This error is typically associated with issues in the motherboard's voltage regulation or CPU seating. To troubleshoot, perform a power drain, check for firmware updates, and inspect the CPU for any bent pins or debris. If the problem continues, the motherboard may need to be examined. [community thread]

Why does the iDRAC display CPU speed in MT/s instead of MHz or GHz on my server?

This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]

Can the R760 server support two Nvidia L40 video cards?

Yes, the R760 server with dual CPUs can accommodate two Nvidia L40 GPUs, as they are double-width and within the power specifications. Ensure you have a power supply of at least 1600W and the appropriate GPU riser kit, power cables, and cooling components for optimal performance. [community thread]