Part number P43322-B21
Price: $910.00 USD
HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit
| kit count | 1 |
|---|---|
| speed mhz | 4800 |
| capacity gb | 16 |
| kit total gb | 16 |
| ram generation | DDR5 |
Configure a complete server with live pricing
It seems there may be a hardware issue with your server. Try powering on the server with a minimal configuration by removing all add-on cards. If the problem persists, consider contacting HPE support for further assistance. [community thread]
To monitor the array status using SNMP on the ProLiant ML350 Gen10, ensure you are using the correct OID, which is 1.3.6.1.4.1.232.3.2.2.1.1.6 for cpqDaCntlrCondition. If you receive a NULL value, consider downloading the SIM MIB kit and refer to the documentation for compiling and customizing SNMP MIBs for further assistance. [community thread]
If your ML350 Gen10 server fails to POST and indicates an internal processor error, first ensure that the CPUs are properly seated and compatible. You may also need to clear the NVRAM/CMOS by following the appropriate steps in the server manual. If the issue persists, consider checking for additional error codes, updating or rolling back the firmware, and inspecting other hardware components. [community thread]
If your server is not booting with a Tesla V100 GPU and shows a power failure and riser seating issue, try reseating or swapping the riser, updating the ILO and BIOS firmware, and switching the power supply to High Performance mode. Additionally, testing with minimal hardware may help determine if the issue is related to the riser, power draw, or firmware. [community thread]
You can download the HPE System Insight Manager - MIB Kit, which includes all necessary MIB files for monitoring various server parameters. For specific OIDs related to issues like hard disk failures, CPU usage, and temperature, refer to the documentation on compiling and customizing SNMP MIBs with HPE SIM. [community thread]