Part number P65023-B21
Price: $3,638.60 USD
HPE 6.4TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static V2 Multi Vendor SSD
| endurance | MU |
|---|---|
| interface | NVMe |
| drive type | nvme |
| capacity gb | 6400 |
| form factor | 2.5" |
| endurance class | MU |
Configure a complete server with live pricing
Try reseating the PCI-E riser card to ensure a proper connection. If the issue persists, test with a different, known working riser card to determine if the problem lies with the riser or the server's motherboard. [community thread]
To fix the 'Base System Device' issue, download and install the Intel chipset driver from the HPE Support Center for your ProLiant DL380 Gen11. Alternatively, you can use the HPE Service Pack for ProLiant (SPP) to automatically install the necessary drivers. After installation, reboot the server and check Device Manager to ensure the devices are correctly identified. [community thread]
SATA SSDs do not support the UNMAP command, which is a requirement for the operating system to recognize them as SSDs. Consequently, the OS may classify the SATA RAID array as an HDD, leading to features like defragmentation being enabled. Disabling defrag is advisable, but be aware that without TRIM support, performance may degrade over time. [community thread]
The S100i controller may not support all 12 drives due to hardware limitations. It is advisable to check the compatibility of the drives being used and consider upgrading to a dedicated Smart Array controller for full support of all 12 drives. [community thread]
The issue may be related to the firmware version of the RAID controller. Updating to the latest firmware version could resolve the problem, as earlier versions may not support CentOS 7.2 properly. [community thread]