Part number PW17Y
Request a quote
DELL PCIe NVMe HARD DRIVE BACKPLANE 2.5 INCH SFF 8 BAY FOR DELL EMC POWEREDGE R660 / R6625 - HDD BP SMALL FORM FACTOR 8B / 8SFF - PCI-E NON VOLATILE MEMORY EXPRESS - ( ASSY, CRD, BP, 1U, 8X2.5UNI, 16G, V2 )
| interface | NVMe |
|---|---|
| form factor | 2.5" |
| component type | backplane |
Configure a complete server with live pricing
This error is typically associated with issues in the motherboard's voltage regulation or CPU seating. To troubleshoot, perform a power drain, check for firmware updates, and inspect the CPU for any bent pins or debris. If the problem continues, the motherboard may need to be examined. [community thread]
Yes, the R760 server with dual CPUs can accommodate two Nvidia L40 GPUs, as they are double-width and within the power specifications. Ensure you have a power supply of at least 1600W and the appropriate GPU riser kit, power cables, and cooling components for optimal performance. [community thread]
To install an NVIDIA L4 GPU in a PowerEdge R760xd2, you will need Riser Config 3A, a GPU enablement kit (part number 470-BBWW), and the NVIDIA L4 GPU itself (part number 490-BJRQ). Ensure that your server's BIOS and iDRAC are updated, and a power supply of 1100W or more is recommended for stable operation. [community thread]
The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]
To acquire the GPU installation kit for the PowerEdge R7625, it is recommended to contact the customer support hotline for a quote tailored to your system. The installation cable kit number is typically 06KX6, which includes specific cables such as 0M6CK, GPN9K, 0DK9Y, and MD9J9. [community thread]