Part number VXTRT
Request a quote
DELL 1U STANDARD SECURITY BEZEL FOR DELL EMC POWEREDGE R660 / R6615 / R6625 - ( ASSY, BZL, STD, 1U, 14G, GCR )
| accessory kind | bezel |
|---|
Configure a complete server with live pricing
This is a known presentation error in iDRAC9 where the CPU speed is incorrectly labeled as MT/s instead of MHz or GHz. It does not indicate a hardware or firmware issue, but rather a unit-labeling mistake in the user interface. [community thread]
To resolve HWC8010 and UEFI0459 errors, first reseat the PERC 755 RAID card and any associated risers, ensuring they are in the correct slots. Next, access the BIOS/iDRAC settings to accept the current hardware configuration as valid. If the issue persists, check for firmware updates or temporarily remove the PERC card to see if the error clears. [community thread]
Yes, the DXD9H hard drive tray caddy is compatible with the PowerEdge R360 server, as it is part of the 16th generation of PowerEdge servers. [community thread]
The LED codes on the R660 motherboard can signal various issues, such as a 5V switch fault or problems with connected USB devices, iDRAC cables, or the rear I/O card. To troubleshoot, perform a flea power drain, clear the NVRAM, and test with only the minimum components necessary for POST. If the server still does not boot, further inspection of the components may be required. [community thread]
You can attempt to extract the firmware from the Windows driver version using a tool like 7-ZIP. Additionally, check the Dell support page for the R340 to find any available firmware updates that may not be prominently listed. [community thread]