Part number 0Y8P9X
Price: $379.40 USD
Dell HDD Backplane SAS-12G/SATA-6G, 16x 2.5, noCables, for T430, T630, T440
| interface | SAS |
|---|---|
| component type | backplane |
Configure a complete server with live pricing
The PowerEdge R750XS does not have a specific GPU enablement kit, and there is no documented support for GPU configurations. For detailed information, refer to the technical guide provided by the manufacturer. [community thread]
For retrofitting the R440 to support NVMe drives, it's advisable to refer to the user manual for accurate cabling instructions. A PCIe extender card may be necessary if utilizing the SAS drive slots, and ensure that the SAS cables are of adequate length to connect to the HBA card. [community thread]
The T640 server is not compatible with H100 GPUs due to its insufficient power capacity and PCIe generation limitations. The server can only support GPUs with a maximum power consumption of 300W, while the H100 requires at least 350W and is designed for Gen 5 PCIe, which the T640 does not support. [community thread]
The RAC0501 error suggests a communication problem between the iDRAC and the storage controller. Start by updating the iDRAC firmware, system BIOS, and storage controller firmware. Additionally, verify the storage controller's status during boot, ensure it is properly seated, and check iDRAC settings for correct storage configuration. [community thread]
When replacing the backplane and controller in a Dell R650 server, it's important to note that the necessary cables may not be included with the new components. It is recommended to contact local support or raise a ticket to ensure you receive the correct cables for your setup. [community thread]