Part number 830824-B21 · also known as 830824-B21 · 830826-001
Price: $91.00 USD
HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller — PCIe RAID with 2GB cache for internal SAS storage, Gen10 ProLiant servers (not supported on slot 3 of DL360 Gen10).
| family | P408i-p |
|---|---|
| cache gb | 2 |
| has cache | True |
| interface | SAS-12G |
| form factor | pcie |
| raid levels | 0/1/5/6/10/50/60 |
| component type | controller |
| ports internal | 8 |
| controller family | Smart Array P408 |
Configure a complete server with live pricing
The S100i controller may not support all 12 drives due to hardware limitations. It is advisable to check the compatibility of the drives being used and consider upgrading to a dedicated Smart Array controller for full support of all 12 drives. [community thread]
To set up the MR416i controller, access System Utilities by pressing F9 during POST. Navigate to System Configuration > HPE MR416i-a Gen10+, create a logical drive by selecting the RAID level and drives, then apply and save the configuration to ensure the system recognizes the drives for OS installation. [community thread]
The issue may be related to the firmware version of the RAID controller. Updating to the latest firmware version could resolve the problem, as earlier versions may not support CentOS 7.2 properly. [community thread]
To update firmware through iLO without disrupting VMWare, upload the firmware file in the firmware update section of iLO. The installation typically occurs online, and you can reboot the server at your convenience to activate the new firmware. [community thread]
Yes, you can substitute a failed drive with a larger capacity, but the RAID configuration will default to the size of the smallest drive in the array. While it's possible to use a slower drive, be aware that this may affect overall performance. [community thread]