Part number P26269-B21
Price: $1,567.36 USD
− For the three x16 OCP3 adapters, P22767-B21 (Gen4), (Gen4) and P73114-B21 (Gen5), the connection to either "x8 PCIe5 lanes onboard" or to a "x8 PCIe5 OCP3 cable" would be sufficient. As a x8 PCIe connection provides max throughput at 126GB/s (Gen4) or 252GB/s(Gen5) for Gen4 or Gen5. A x16 OCP3 Gen5 cable connection is also allowed for the physical PCIe x16 design of the adapters.
| slot type | ocp3 |
|---|
Configure a complete server with live pricing
To resolve the REST API error, try resetting the iLO from the console and then SSH into the iLO to execute the command 'oemhp_clearRESTAPIstate'. After that, reboot both the server and the iLO by shutting down the server, disconnecting all power sources and cables, reconnecting them, and powering the server back on. [community thread]
Ensure that your network settings are correct and that the servers are reachable. You may want to review the documentation for adding servers to OneView and consider resetting the iLO configuration or checking for any certificate issues. [community thread]
The part number for the LFF 3.5' drive caddy for the Proliant ML350 Gen11 is P47216-B21. Additionally, if upgrading the 2nd or 3rd LFF drive cage, you will need the embedded SATA cable kit, part number P47225-B21. [community thread]
Ensure that you are using the HPE custom ESXi image, as it includes the necessary AMS and iLO drivers. If the issue persists, verify the installation of the AMS package through the ESXi management interface and consider reverting to an earlier version of ESXi, such as 6.7, where AMS is recognized. [community thread]
Verify that the IPv4 address is correctly configured using the HPE Lights-Out Online Configuration Utility, which can be installed on your server. If the address is set correctly, try restarting the iLO management controller, as the firmware upgrade may have reset settings to defaults. [community thread]