Part number SRKXH · also known as 4XG7A63422 · 4XG7A63465 · 4XG7A72946 · P36923-B21 · PY-CP62XK · PYBCP62XK · UCS-CPU-I4316
Price: $1,400.00 USD
Intel Xeon Silver 4316 2.3GHz 20C/40T 30MB Cache 150W TDP
| cores | 20 |
|---|---|
| sspec | SRKXH |
| socket | LGA4189 |
| ark url | https://www.intel.com/content/www/us/en/products/sku/215270/intel-xeon-silver-4316-processor-30m-cache-2-30-ghz/specifications.html |
| oem pns | {'HPE': ['P36923-B21'], 'Cisco': ['UCS-CPU-I4316'], 'Lenovo': ['4XG7A63422', '4XG7A63465', '4XG7A72946'], 'Fujitsu': ['PY-CP62XK', 'PYBCP62XK']} |
| threads | 40 |
| cache mb | 30.0 |
| bom label | Intel Xeon Silver 4316 2.3GHz 20C/40T 30MB Cache 150W TDP |
| boost ghz | 3.4 |
| clock ghz | 2.3 |
| tdp watts | 150 |
| generation | Ice Lake |
| spec source | ark |
| mem channels | 8 |
| base clock ghz | 2.3 |
| sibling sspecs | ['SRKXH'] |
| boost clock ghz | 3.4 |
| max mem speed mhz | 2667 |
| folded synthetic pns | ['SYNTHETIC:intel:intel-xeon-bronze-4316', 'SYNTHETIC:intel:intel-xeon-scalable-4316', 'SYNTHETIC:intel:intel-xeon-silver-4316', 'SYNTHETIC:intel:ucs-cpu-i4316'] |
Configure a complete server with live pricing
This is almost always a seating issue — power down, remove the processor and heatsink, then reinstall and torque all four corner screws evenly. If it still isn't detected in iDRAC, update BIOS/iDRAC firmware and run the Lifecycle Controller's repurpose option so the CPLD re-registers the second socket. [community thread]
To activate Intel VT-d, reboot the server and press F1 to access the UEFI Setup. Navigate to System Settings, then Operating Modes, set it to Custom Mode, and save the changes. Next, go to Devices and I/O Ports, enable Intel VT for Directed I/O (VT-d) and SR-IOV, then save and reset the system. [community thread]
The Micron 7500 U.3 NVMe disks are not compatible with Dell R750 servers, which only support U.2 drives. Therefore, there is no firmware available for U.3 disks on this server model, and users should consult Micron for further assistance. [community thread]
To address this issue, ensure that your DIMMs are properly populated according to the server's memory guidelines. Check the BIOS version and verify the specifications of the installed DIMMs, as only certain capacities are supported for 2R DIMMs. [community thread]
No, to utilize a second PCIe card in slot 3 via riser 2, a second CPU is necessary. Without the second CPU, slot 3 will not function, and you will only have access to slot 1. [community thread]